Motorcycle Current Gear Indicator with LED Display Suzuki – 1-6 Gears, ECU Connection, Auto Programming

Add to wishlistAdded to wishlistRemoved from wishlist 0

Add to compare

The Motorcycle Current Gear Indicator with LED Display is a must-have for any Suzuki motorcycle owner looking for an efficient and accurate gear position indicator. This device is compatible with Suzuki fuel-injected (FI) motorcycles that have the Mode select switch coupler, including models like the Suzuki Boulevard and Suzuki V-Strom.

This gear indicator connects directly to the ECU through the diagnostic connector, providing faster and more reliable gear position readings than other indicators that rely on speedometer or tachometer signals. The indicator shows gear numbers from 1 to 6 as well as a neutral indicator, making it easy for the rider to know their current gear at a glance.

The LED display is easy to mount anywhere on the motorcycle and features auto programming, which means there’s no need for setup or a programming wire. The indicator automatically reads data from the ECM when the ignition is on, the side stand is up, and the engine stop switch is in the “RUN” position. This makes installation simple and quick, as there’s no need for manual configuration.

Key Features:

Displays current gear number: Shows gears 1-6 and neutral indicator.
Faster gear detection: Directly connects to the ECU for quicker and more accurate readings.
Easy installation: No setup required, just connect to the diagnostic connector.
Universal compatibility: Fits a wide range of Suzuki motorcycles and other bikes with a shift lever.
LED display: Can be mounted anywhere for convenient visibility.
Auto programming: No need for buttons or programming wires.
Suzuki models: Compatible with a variety of Suzuki fuel-injected motorcycles from the Boulevard, Intruder, V-Strom, Bandit, GSX-R, and more.

Installation:

Locate the WHITE, 6-pole male diagnostic connector, typically near the ECM box (specific locations vary by model).
Remove the black cap or dummy female plug if present.
Connect the Jxkj plug to the connector and route the cable to the desired mounting location.
Peel off the green plastic backing from the unit and mount the display.
Secure the cable with the provided cable ties.
The unit is now fully functional with no further setup required.

Original Seller Description

Fitment:

Suzuki Boulevard C50 2005-2008
Suzuki Boulevard M50 2005-2018
Suzuki Boulevard C90 2005-2012
Suzuki Boulevard C109R/T 2008-2015
Suzuki Boulevard M109R/R2 2006-2010
Suzuki DL650 V-Strom 2004-2011
Suzuki DL1000 V-Strom 2004-2013
Suzuki GSF650 Bandit 2007-2008
Suzuki GSF1250 N/NA Bandit 2007-2009
Suzuki GSF1250 S/SA Bandit 2007-2016
Suzuki GSX1400 2004-2009
Suzuki GSX-R600 2004-2005
Suzuki GSX-R750 2004-2005
Suzuki GSX-R1000 2003-2004
Suzuki Intruder C800 2005-2008
Suzuki Intruder M800 2005-2015
Suzuki Intruder C1500 2005-2012
Suzuki Intruder M1500 2009-2015
Suzuki Intruder C1800R 2008-2015
Suzuki Intruder M1800R 2006-2010
Suzuki RMX-450Z All Years
Suzuki RM-Z250 (Fi model) All Years
Suzuki RM-Z450 (Fi model) All Years
Suzuki SV650 2003-2014
Suzuki SV1000 2003-2009
Suzuki VL800 Intruder Volusia 2005-2008
Suzuki VL1500 Intruder 2005-2012
Suzuki VLR1800 2008-2015
Suzuki VZ800 Marauder 2005-2015
Suzuki VZ1500 2009-2015
Suzuki VZR1800 2006-2010

Feature:

Shows current gear number
Indicates current gear from 1 to max of 6. as well as a neutral indicator.
Auto programming
Compatible with all motorbikes,four wheeler, bikes etc. will fit anything with a shift lever
Detects the current gear faster than other gear indicators that use speedometer/tachometer signal.
Display can be mounted anywhere

Foreword:

Congratulations on your purchase our gear position indicator,is the most advanced gear position indicator on the market today. This product will fit all Suzuki fuel injected (FI)motorcycles which have on-board Diagnostic System connector.This connector is referred as “Mode select switch coupler” in the Suzuki manuals. Unlike other gear indicators available for your bike,this product connects to the diagnostic connector. It makes the installation very simple.The unit reads data directly from the ECM, offering faster and more reliable readings than competitive products.The unit is fully automatic,there are no buttons and no “programming wire”, The display will indicate all gears correctly when ignition is On,side stand is UP and the engine stop switch is in RUN position.

Installation:

Find the WHITE,6-pole male diagnostic connector,usually near the ECM box.It may have a black cap,or “dummy” female plug (without wires) attached to it.GSF650 Bandit/GSF1250;under right side frame cover DL650 ABS model;behind right side fuel tank cover VL1500/Boulevard C90/Intruder C1500;behind left frame head cover Other models;under seat (rider or pillion) Remove the black cap or dummy female plug,and connect the Jxkj plug.Route the cable to the mounting location.Peel off the green plastic from the back of the unit,and mount the display.Secure the cable with the cable ties supplied.The unit is fully functional after installation.there is no need to setup.

Troubleshooting:

Disconnect the connector and check whether the pins are broken,bent or pushed out of position.Reconnect the plug, and make sure that all connections are good and the connector is fully seated.Make sure the ignition is ON,side stand is UP and engine stop switch is in RUN position when you test the gear position indicator.If some gears are not indicated properly,most likely the Gear Position switch is defective,modified,or a TRE box is installed.If the indicated gears are correct except under hard acceleration or braking,there is interference in the bike is wiring and the ECM receives incorrect gear position values from the sensor.This Jxkj model indicates the gear position as known by the ECM.

Warranty:

The unit is completely sealed and epoxy encapsulated,which gives extreme protection for the internal parts from shocks,vibrations and water. To ensure trouble-free operation from the start,all units have been extensively tested prior to shipment.Our dealers are offering a 30-day money-back guarantee on Heal Tech products,thus you will get your money back if the product does not fulfill your expectations.( ALL parts must be returned in original condition for full refund) .

Package List:

1 x Motorcycle Speed Gear Display + Holder

Plug cable installation sequence diagram